Phone: +49 (0) 34 602 / 70 88 - 0

Crane and forklift attachment with integrated hydraulic functions for installing horizontal and vertical wall elements as well as installing short roof elements

Dual circuit system

  • 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
  • for construction site use according DIN EN 13155


  • installation of sandwich panels for cold room construction and on industrial construction sites


  • crane (e.g. truck-mounted crane, top slewing crane)
  • forklift (in connection with a forklift adapter)


  • crane eye
  • fork lift adapter


  • safety belts
  • protective caps


  • fork lift adapter with built-in side shift
  • radio remote control

Special feature

  • integrated hydraulic functions (stepless tilt of the suction bridge by 90°, side shift during forklift operation 200 mm)

Material to be handled

Using the tried and tested Wirth round and oval suction pads you can transport and install almost every standard sandwich element and many corrugated sheets with the OKTOPUS® PANEL-Jack GL-E. The suction areas of the elements to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective film.

  • Device / Suction padsWorking Load Limit
    8 round suction pads (∅ 250 mm)250 kg
    12 round suction pads (∅ 250 mm)400 kg
    8 oval suction pads (100 mm x 320 mm)130 kg
    12 oval suction pads (100 mm x 320 mm)200 kg
    16 oval suction pads (100 mm x 320 mm)260 kg
  • Weight crane attachmentapprox. 230 kg
    Weight forklift attachmentapprox. 400 kg
    Operation cranecontrol panel on the device
    Operation fork liftcontrol panel connected to the device via cable,
    optional radio remote control
    Power supplybattery, 24 V
    Vacuum supplyvacuum pump
    Suction padsWirth standard suction pads
    - round suction pads (∅ 250 mm) or
    - oval suction pads (100 mm x 320 mm)
    Equipment- safety belts
    - protective caps
    Options- forklift adapter with built-in side shift
    - radio remote control



  • Crane attachment
  • Fork lift attachment
  • Vertical wall installation
  • Horizontal wall installation
  • Roof installation
  • Overhead installation
  • Rotate 360°
  • Tilt around horizontal axis
  • Turn-over ≥ 180°
  • Tilt around vertical axis (swivel)
  • Side stroke
  • Teleskop. Ausleger/ Kranarm/Hubsäule
  • Control panel at the device / cable remote control
  • Radio remote control
  • Manual operation
  • Battery

sandwich devices

Cookies facilitate the provision of our services. By using our services you agree that we use cookies.