Phone: +49 (0) 34 602 / 70 88 - 0

Vacuum lifting device for construction site use with hydraulic rotating and tilting function as well as electrically driven movable counterweight balancer

Dual-circuit system

  • 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated vacuum reservoir
  • for construction site use according to DIN EN 13155

Use

Handling flat glass and window elements as well as long and narrow glass fins. The suction areas of the load to be lifted must be air-impermeable, have to have an even and clean surface and must not be covered with protective foil.

Hoist

truck-mounted crane

Fastening

  • at the crane hook

Description

The vacuum based load lifting attachment OKTOPUS® GL-M 7000 DES So 435 R EA B24 P is designed for handling large-sized glass panes and window elements up to a maximum weight of 7,000 kg. It is equipped with a dual-circuit vacuum system for construction site use according to DIN EN 13155. The crane eye of the device allows attaching the device to an existing hoist (provided by the customer). The device is equipped with a suction frame for the installation of large-sized glass façade elements up to 7,000 kg and with a special suction frame for the installation of vertical glass fins up to 1,600 kg.

The suction frames can hydraulically be rotated endless by 360° and tilted by 90°. A counterweight balancer with electrically driven counterweights serves for balancing the load. The operating and display elements are arranged ergonomically and allow comfortably positioning and moving the load. The electrically operated vacuum pump is supplied with energy by a 24 V DC battery system. Deviations from the nominal condition are indicated by optical and acoustical warning devices. Even in the case of complete energy breakdown, vacuum remains in each suction pad for at least 5 minutes. In this way a secure lowering of the load can be ensured at all times.


  • Device / Suction padsmaximum Working Load Limit
    16 suction pads Ø 400 mmup to 1,600 kg with suction frame type 2
    70 suction pads Ø 400 mmup to 7,000 kg with suction frame type 1
  • Weightwith suction frame type 1 and counterweight balancer ca. 3,900 kg
    with suction frame type 2 and counterweight balancer ca. 3,150 kg
    Suction pads70 pcs. Ø 400 mm
    Suction frame type 1basic version 4.4 m x 1.8 m with up to 28 suction pads; Working Load Limit 2,800 kg
    full version 10.5 m x 1.8 m with up to 70 suction pads; Working Load Limit 7,000 kg
    Suction frame type 2consists of 2 hydraulically folding wings with up to 16 suction pads; Working Load Limit 1,600 kg for handling glass fins
    Vacuum generationelectrical vacuum pump
    Operationcable remote control
    Vacuum systemdual-circuit vacuum system for construction site use
    Nominal pressure pneumatic system-0.65 bar to -0.73 bar
    Power supply24 V DC battery system
    Optional equipmentblow-off function
    radio remote control
    Equipment- technical documentation
    - built-in battery charger
    - transport rack
    Movements
    Lifting and loweringby the crane hook
    Rotating horizontallyin the crane hook, manually 360°
    Rotation of the suction framehydraulically 360° endless
    Tilting the suction framehydraulically 90°

Use of OKTOPUS® GL-M 7000

Legend

  • Crane attachment
  • Mini crane manipulator
  • Fork lift attachment
  • For even glass panes
  • For curved glass panes
  • Rotate 360°
  • Rotate 90°/95°
  • Tilt around horizontal axis
  • Tilt around vertical axis (swivel)
  • Telescopic boom/crane arm/lifting column
  • Control panel at the device / cable remote control
  • Radio remote control
  • Manual operation
  • Mains current
  • Battery

Glasslifter

Cookies facilitate the provision of our services. By using our services you agree that we use cookies.