Phone: +49 (0) 34 602 / 70 88 - 0

Manipulator for handling large-sized sandwich elements

Dual circuit system

  • 2 independent vacuum circuits, each vacuum circuit with 2-fold safety and integrated reserve vacuum
  • for construction site use according to DIN EN 13155

Application

  • Handling flat construction elements on construction sites

Hoist

  • forklift / telescopic forklift

Fastening

  • quick change system Maniton, Herkules, Merlo
  • fork sleeves for transport

Description
The vacuum based load lifting attachment OKTOPUS® IT-BT 850 is designed for handling large-sized construction elements with a maximum weight of up to 800 kg on construction sites. Each function is controlled via remote control (optional radio remote control). The necessary negative pressure in the suction pads is generated by a vacuum pump which is operated with 24 V DC.
Optical and acoustic signaling devices indicate deviations from the nominal condition. Even in case of complete breakdown of energy supply the vacuum will remain in each suction pad for at least 5 minutes. In this way it is ensured that the load can be securely lowered at all times.

Material to be handled

The OKTOPUS® IT-BT 850 is suitable for handling sandwich elements. The suction areas of the elements to be lifted have to be air-impermeable, have to have an even and clean surface and must not be covered with protective film.


  • Device / suction padsWorking Load Limit
    12 round suction pads ∅ 250 mmmax 400 kg
    16 round suction pads ∅ 250 mmmax 530 kg
    24 round suction pads ∅ 250 mmmax 800 kg
  • Weight:approx. 750 kg (12 round suction pads without extension)
    approx. 970 kg (24 round suction pads with extension)
    Power supply:24 V Battery
    Nominal pressure pneumatic system:-0,65 bar bis -0,73 bar
    Vacuum supply:vacuum pump
    Operation:cable remote control
    Options:radio remote control
    Movements (electric)
    telescopic:forwards / backwards 200 mm
    side shift:left / right 200 mm
    turn-over:180°
    rotate: 360°


Use of OKTOPUS® IT-BT 850


Legend

  • Crane attachment
  • Fork lift attachment
  • Vertical wall installation
  • Horizontal wall installation
  • Roof installation
  • Overhead installation
  • Rotate 360°
  • Tilt around horizontal axis
  • Turn-over ≥ 180°
  • Tilt around vertical axis (swivel)
  • Side stroke
  • Teleskop. Ausleger/ Kranarm/Hubsäule
  • Control panel at the device / cable remote control
  • Radio remote control
  • Manual operation
  • Battery

sandwich devices

Cookies facilitate the provision of our services. By using our services you agree that we use cookies.