Vacuum Lifter>Glass construction>Device Selection Form printPrint sitemapSitemap tip siteRecommend Site

Device Selection Form



Please answer the questions in the form below as accurately as possible and send it to us direct.  You can also print out the form and send it to us by fax.
We will call you and, using this information, we can advise you in the best possible manner.  Enquiries from countries in which we have distribution partners will be forwarded accordingly.

Please fill in all fields marked with an *.

Address information
Glass panes

The glass panes are:

The bending radius of the curved glass panes is mm.
Weight and size

The weight and size of the panels to be installed are:

Length: min. mm max. mm
Width: min. mm max. mm
Thickness:   mm
Weight: max kg
The position of the transported goods and transport direction
horizontal
vertikal
Rotational movement

Rotation

 drehen

Rotational movement

Pivotional movement

Pivotion

 schwenken

Pivotion

Operation

The operation of the device /control of the vacuum is to be performed:

Manually using

Electrically using:
Electrical control with electromagnetic valves

oder
(length m) or
Positioning

Additional requirements for the positioning of the load:

In addition to the rotation and swing movements described above, the load must rotate

° on the y axis,
or move mm along the x axis,
mm along the y axis or mm along the z axis. 		Positionierung

Requirements for the positioning of the suctions cup in the x axis:

Due to existing sash bars or frames, the adjustment area of the suction cups in the x direction must be at least mm.

 Positionierung
Installation

The installation is to be performed using a:

(max. load bearing capacity 300 kg)
with a load bearing capacity of t
with a load bearing capacity of t

The telescope lift has a revolving superstructure:

The forklift / telescope lift has a side-shifting-unit:

Electricity supply

Please enter the voltage power supply at the site where the equipment will be used in order to ensure the correct charging device for our vacuum lifting equipment.

Delivery

The vacuum lifting device will be needed by

/ is:

For hiring enquiries

The vacuum device will be need for days. (Please see our hiring conditions.)

Construction phases (fill in only for hired devices)

If the construction project is divided into various construction phases and you will not be needing the vacuum lifting device between times, please specify the phases below:

Phases
from to
from to
from to
from to
Documents

Please send me information about your entire product range of vacuum lifting equipment to use in

,
,